DPT, Car roof tent, Car tent, Kaki, Size L:221* W:140* H140 Cm
-1001x1001.jpg)
-1001x1001.jpg)
-1001x1001.jpg)
-1001x1001.jpg)
-1001x1001.jpg)
Free Shipping
-80x80.jpg)
-80x80.jpg)
-80x80.jpg)
-80x80.jpg)
-80x80.jpg)
Item NO: DP4X4-0105
Item Name: Roof Tent
Size: L2.1*W1.4*H1.4m
N. W.: 34 kg
Color: green
Material:
Fabric: 280g poly-cotton rip-stop canvas
Outer Cover: PVC
Base: ABS & aluminum
Ladder: aluminum
Mattress: 80mm high-density foam
Max bear: 300kg
Fit for: 2 person
Features:
1. Simple structure, Easy set -up and pack down
2. Compact and lower profile
3. Large internal space with windows.
4. With Internal light, storage pockets
5. Can float on water and drive with motor
DP4X4-0105 manual instruction
1.Put the canopy on cross bar and adjust its position.
2.Hook the u-bolt to the bottom of the cross bar to link the canopy..
3.Take out the U hook parts
4.Hook the u-bolt with 8 nuts (2 nuts on each u-bolt) , keep the nuts on both sides in relative balance.
5.Inflating the mattress to be 8PSI.
6.Inflating the tent by pressing the automatic inflation button.
7. Pull out the ladder. The installation is complete.
Warnings:
1. Do not open the zip when air tube is inflated.
2. Tighten the valves on the tent and mattress in case of air leakage.
3. Keep all flame and heat resources away from the tent fabric.
4. Never leave children alone to play in the appliances.
5. Always observe the safety instructions for these appliances.
6. Keep exits clear.
7. Make sure ventlation openings are open to avoid suffocation.
Accessories:
1. bracket*1
2. Plate*4
3. Screw*8
4. U-bolt*8
5. Nut*8
6. Mattress pump*1
7. Lithium battery*1
Item Name: Roof Tent
Size: L2.1*W1.4*H1.4m
N. W.: 34 kg
Color: green
Material:
Fabric: 280g poly-cotton rip-stop canvas
Outer Cover: PVC
Base: ABS & aluminum
Ladder: aluminum
Mattress: 80mm high-density foam
Max bear: 300kg
Fit for: 2 person
Features:
1. Simple structure, Easy set -up and pack down
2. Compact and lower profile
3. Large internal space with windows.
4. With Internal light, storage pockets
5. Can float on water and drive with motor
DP4X4-0105 manual instruction
1.Put the canopy on cross bar and adjust its position.
2.Hook the u-bolt to the bottom of the cross bar to link the canopy..
3.Take out the U hook parts
4.Hook the u-bolt with 8 nuts (2 nuts on each u-bolt) , keep the nuts on both sides in relative balance.
5.Inflating the mattress to be 8PSI.
6.Inflating the tent by pressing the automatic inflation button.
7. Pull out the ladder. The installation is complete.
Warnings:
1. Do not open the zip when air tube is inflated.
2. Tighten the valves on the tent and mattress in case of air leakage.
3. Keep all flame and heat resources away from the tent fabric.
4. Never leave children alone to play in the appliances.
5. Always observe the safety instructions for these appliances.
6. Keep exits clear.
7. Make sure ventlation openings are open to avoid suffocation.
Accessories:
1. bracket*1
2. Plate*4
3. Screw*8
4. U-bolt*8
5. Nut*8
6. Mattress pump*1
7. Lithium battery*1