DPT, Aluminum coffee grinder, Small Coffee grinder for trips, Black, capacity 30 Gm

Dpt Cylindrical Aluminum Manual Coffee Grinder 30/12 Degrees
Model: Dphw-0116B
Manufacturing Material: Aluminum
Weight: 583 G
Capacity: 30 Gm
The Description :
- S Size And L Capacity
- Portable And Durable
- Long Handle, Grinding And Time Saving
- S Body, Can Hold 30G Coffee Beans, You Can Enjoy Grinding Slowly
- Set Up The Coarse Grinding Position By Rotating The Scale Under The Body
Warning :
♦ The Device Is Intended For Grinding Coffee Beans Only. Do Not Grind Other Material.
♦ It Is Recommended To Clean It With A Brush. Do Not Wash It With Water.
♦ Beware Of Sharp Metal Blades. It Is Forbidden To Be Used By Children.
Store It In A Cool Dry Place.
♦ Customers Are Not Advised To Disassemble Or Replace Any Part Thereof.
♦ If You Have Any Special Requirements, Please Act With The Advice Of Relevant Professional Persons.
The Origin Of The Body In The Storage. Then Open The Lid And Pour Out The Coffee Beans From The Top Of The Grinder (Less Than 20G)
Hold The Body, Rotate The Handle And Pull Out The Storage, Pour Out The Coffee Grounds After You Have Finished Grinding
Turn It Clockwise To Get A Fine Grind
Turn It Counterclockwise For A Coarser Grind
♦ Turn It Clockwise To The End, This Position Is Called The Starting Position
♦ You Can Return To The Starting Point To Adjust The Roughness You Prefer.
Espresso: Runs 12-18 Clicks
Power Over: Runs From 24-31 Clicks
French Coffee: Runs From 33 To 36 Clicks
♦ The Table Above Is For Your Preference Reference Only
♦ Do Not Attempt To Grind Coffee Beans To 0 To 6 Clicks To Protect The Sharpness Of The Blades
♦ Cover The Lid Before Adjusting The Coarseness Of The Coffee

Find The Mistakes And Resolve It
♦ Q: Why Is The Adjustment Scale Too Loose To Adjust The Coarseness?
A: Because The Spring Or Protrusions Get Stuck. Try To Hold The Body And Shake The Handle Slightly Until You Hear A Click, Which Means The Spring Or Prongs Are Loose. If Not, Try Unscrewing The Cap Over The Bearing And Remove The Entire Blade. Clean And Install Gear Assemblies