CMP, Flamethrower, Multi-use lighter, , L3.2*W3.2*H15.5 Size

Item No.: CMTO-0001
Item Name: Blow Torch
Material: Copper + ABS +Alloy Aluminum
Size: L3.2*W3.2*H15.5CM
Net Weight: 0.15KG
Fuel: Butane gas
Temperature: 1300 degrees (adjustable)
Gas consumption: 50 grams to 140 grams / hour.
Cartridge 7/16” connection
Ignition: Manual

Features:
1. Manual ignition, need to smoke combustion.
2. This Gas Torch can be used for Flamethrower.
3. Made of copper and stainless steel, durable and compact.
4. Gas consumption is 50 grams to 140 grams / hour, each tank of gas can be used continuously1.6 hours to 4.4 hours, after the gas is used up, replace the new gas tank in just 2 seconds.
5. Ideal for using in cooking, soldering, brazing, Camping, BBQ and etc.


1. Torch tip
2. Nozzle
3. Control knob
4. Butane cartridge
5. On
6. Off
7. Rubber seals
8. “o” ring seals
9. Tab

Only use in well ventilated areas
Important:
Read these instructions carefully before use so as to familiarize yourself with the appliance before connecting it to the gas cartridge. Keep these instructions for future use.

Some parts will be very hot during and after use. Keep young children away.
Change the gas cartridge outside away from sources of heat or naked flame such as pilot lights, electric fires etc., and away from other people.

The appliance should be used away from flammable materials and at least one meter away from adjacent surfaces (wall, ceiling). Be especially careful near fat fryers, electric hobs and sources if naked flame.

Be aware of flaring which may occur during the two-minute warm-up period and in which the appliance should not be angles more than 15 degrees from the vertical (upright) position. After two minutes of running, the appliance is preheated and can be used at any angle without flaring.