Maxsun, Portable Gas Stove for Travel and Camping, Outdoor Cooking Gas Stove, Coppery, Size 33*38.9*9.1 Cm

Maxan portable gas stove for travel and trips
Model: MS-77
Size: 33*38*9.1cm
Gas type: butane
Heat input: 3.5 kW
Gas consumption: 253 g / h
Hole diameter: 0.72 mm
Overpressure pressure range switch
Closure: 5.5 bar - 7.0 bar
Color: brass
Advantages:-
- Portable gas stove, solid and stable
- Small size, stable, convenient to use and store
- Works on gas cans
- Light and easy to use and carry during outings and camping
warning:-
- It is used in outdoor places only and in well-ventilated places.
- This burner should only be used with the MAX MSF-1 CRV / MSF-1a Butane Gas Cartridge.
- Read the instructions before use

Explosion risk:-
- Do not use a pan larger than 260mm as it can cover the gas cartridge chamber and cause the gas cartridge to overheat.
- Warning: It is strictly forbidden to use the baking tray if the length of one of its sides is longer than 180mm, otherwise there will be great risks of -cartridge explosion due to overheating.

valve guide
① 1 spark electrode
②2. cartridge cap
③ 3. frying pan support
④4. drip pan
⑤ 5. the stove
⑥6. cartridge arm
⑦7. control panel
⑧ 8. High/low flame control knob with piezo ignition

- Read the instructions carefully before use to familiarize yourself with the burner before connecting it to its gas cartridge.
Safety device:-
- The hob is equipped with a safety device that stops the gas flow if pressure in the cartridge, for example due to overheating, becomes too high
To continue using...
- Turn the control knob (8) to the “” “” position.
- Turn the cartridge lever (6) to the “unlocked” position and remove the cartridge.
- Turn the control knob to the ignition position to release any excess pressure inside the valve.
- Push down the reset lever with the red rubber cap.
- Push and turn the control knob (8) to the ignition position to release any excess pressure inside the valve.
- Insert a new cartridge after checking that the cartridge lever (6) is in the “unlocked” position.
(If the new cartridge is not handy, cool the used cartridge with water.)
- The cartridge can only be installed when the control knob (8) is in the OFF position.
warning
- Before inserting a cartridge, always make sure that the pan support / drip tray has been rotated and placed in the correct vertical position.
- Operating this burner with the pot supports in the down position will cause the burner to overheat and possibly explode.
- Using the stove for the first time:
1. Ensure that the control knob (8) is set to the “” position by turning it clockwise and the cartridge lever (6) to “unlocked”.
2. Open the cartridge cap (2) and insert the cartridge, head facing forward, notch pointing up and in line with value guide (Fig. 2).
3. Press the cartridge lever (6) down (Fig. 3) and close the cartridge cover.
4. If you hear a “hiss” sound, the cartridge is not installed correctly. Do not attempt to ignite the burner but move the lever (6) to the “UNLOCK” position and repeat step (1-4).
5. Push and turn knob (8) all the way to the ignition position until it clicks. (Fig. 4) Repeat this procedure until the burner ignites.
6. Adjust the control knob to the desired position. (Fig. 5) Never set the cartridge lever (6) to the “UNLOCK” position while in use

after use
1. Turn the control knob (8) to the ““” position.
2. Check if the igniter has gone out before adjusting the cartridge lever (6) to the “unlock” position.
3. When the burner has completely cooled down, for your own safety, remove the cartridge.
4. Turn the control knob (8) to the ignition position to release any excess pressure inside the regulator.
5. Put on the red protective cap and always store the gas cartridge in a cool, dry and well-ventilated place.
6. The butane cartridge must be changed in a safe place, eg. outdoors or in a well-ventilated area.

Cartridge change
- Cartridge can be removed even if it is not empty once your stoves have completely cooled:
- Make sure that the gas inlet is completely closed by turning the control knob (8) clockwise to the “●” position, the igniter (5) will go out.
- Disconnect the cartridge by placing the cartridge lever (6) in the “unlocked” position.
- Open the cartridge compartment cover (2) and remove the cartridge.
- The butane cartridge must be changed in a safe place, eg. Outdoors or in a well-ventilated area, preferably outside, away from any ignition sources such as open flames, electricity, and away from other people.
- Check the seals before attaching a new gas cartridge to the machine. (Fig. 6)
- Install a new cartridge following the instructions in the “First Time Use of the Burner” paragraph.

* Storage - maintenance
- When the hob has cooled completely, it should be cleaned of any food or grease residue after each use.
- Store the burner and cartridge in a cool, dry, well-ventilated place, out of reach of children.
- Do not modify the device.