DPT, Table fireplace, White, Size 60*20*24 Cm

steel table fireplace from DPT
Model: DPHW-0129
Manufacturing material: stainless steel, coated steel, tempered glass
Size: Length 60 * Width 20 * Height 24 cm
Burner capacity: 0.7 liters
ignition time: 2 hours
Color: white
Warning:
Please read these instructions carefully before using your bio ethanol burner. Failure to comply with the safety rules may cause serious burns or even a fire.

Get started
Filling the burner box:
• Fill the stove box with fuel to a maximum of 2/3 of each can
• Spilled alcohol should be removed with an absorbent tissue and cleaned with water to prevent ignition outside the burner tank.
• CAUTION: Alcohol spills may cause matte stains on the parquet or floors
• CAUTION: Fuel should be stored at room temperature to facilitate ignition
• CAUTION: Fuel must be stored in a secure location (at least 1 meter / 40 inch) from the stove
• Do not place fuel in front of the heater
• If the flame does not ignite, please repeat the ignition process until the flame burns steadily
• The fuel will burn more slowly at first. Please allow 15 minutes to reach the optimum temperature and flame height
.
refill:
• Check carefully if there is no longer any fire on the surface. The fire must be completely extinguished
• warning! Never overfill the stove! Wait at least 20 minutes for the stove to cool off

Extinguish the stove:
• Please use the extinguishing agent provided in the kit. Never blow out a burner, this will only increase the flame.
• Caution: Do not extinguish the flame with water!
• Allow the fuel to burn completely if possible. This prevents the alcohol left in the tank from burning when re-ignited.
• If you want to extinguish the flame before the fuel burns completely. Please use the extinguishing tool to completely seal the fuel canister opening, and wait for the flame to be extinguished
• Wait about 30 minutes for the stove to reach room temperature. Only then get rid of the remaining fuel
• If the flame is not extinguished immediately, close the lid and wait about 10-15 minutes to allow the flame to die out. Repeat the above instructions until the flame is completely extinguished

Maintenance/Care Instructions:
You can use a damp cloth to clean the inner surface of the hob. Burner can change color due to heat. Stainless steel will appear again after a while, which is normal. Regular maintenance will retain its color. Do not clean with water, pass through the vent and burner surface with a little bio ethanol on a tissue, the stones can be cleaned if desired with a brush and water. Cylindrical burners can be cleaned with water
Caution: Never use chemicals or scouring pads and abrasive sponges to clean, as these may scratch the surface.

Safety instructions:
• Important: The bio ethanol fireplace should be used for decorative purposes and not as a fireplace
• It is not permitted to use a bio ethanol burner as a multi-burner burner or an open fire for combustible liquid or solid materials.
• Do not smoke while refilling or lighting the stove. Danger of explosion!
• warning! Never refill a hot or warm bio ethanol burner. Danger of explosion!
• The flame must not touch the inner part of the metal
• Avoid physical contact with bio-ethanol
• Children, or people who are not in a good physical or mental condition, are prohibited from using the bio ethanol burner
• Be careful with flammable clothing or hair
• Do not blow into fire
• Do not place paper, cardboard, cloth (clothes), etc. on or around the stove
• Do not leave fire unattended
• Do not touch the glass, it may be hot after ignition.