DPT, Rice cooking pot, Automatic pot, Multicolored , capacity 2.5 L

Automatic Rice Cooker On Gas From Dpt
Model: Dpc-0024-2.5L
2.5L With Gas + Le Adapter
Pot Weight: 2.5 Kg - Thickness: 3 Mm
Capacity, Maximum Dry Rice Bag: 4.9 Kg
Gas Type: Lpg
Gas Consumption: 135G/Hour
Energy Rate: 1.8 Kw
Gas Pressure: 2.8 Kpa
Weight 3.5 Kg
Contents
- Cover Handle, Inner Storage, Side Handle, Wind Arm
- Viewing Window, Heating Sensor, Main Burner
- Brand Sticker, Ignition Button (Press First)
- Temperature Retention Button, Water Tray, Lid
- Gas Connector Hose, Cooking Button, Air Vent Regulator
Leveling
1- The Rice Cooker Should Be Placed In A Well-Ventilated Place (Without Strong Winds)
2- Place The Pot At A Distance Of 15 Cm Or More From Flammable Material (Furniture, Walls, Etc.), And There Must Be A Distance Of 50 Cm Or More From The Top Of The Cooker To The Ceilings
3- Do Not Place The Pot Near Flammable Or Explosive Material Such As Petroleum Or Gunpowder
4- Make Sure That There Are No Residues In The Delivery Hose, Then Connect The Hose To The Connector Or Close It Tightly With The Pipe Clamp
- Gas Delivery Hose, Plastic Tube, Plate, Pipe Clamp
Operating Methods
1- Boil Some Water In The Inner Storage To Disinfect It At The First Time. The Inner Storage Is Made Of Pure Aluminum And After Heating It Will Become Darker, But It Is Not Harmful To Humans.
2- Before Cooking, Wash The Rice And Add Enough Water To The Inner Storage, Then Close The Lid
3- Make Sure That The Cooking Button And The Temperature Keeping Button Are In The Upper Position Before Turning On The Gas
4- Press The Two Buttons Slowly .. Keeping The Temperature Will Work When The Cooking Process Begins (Leave The Pressure First And The Pressure Later In Their Position)
5- Watch The Fire From The Observation Window From A Distance Of 30 Cm. When The Fire Is Turned On, Keep The Temperature. Press Down On The Cooking Button, And Then The Main Burner Will Start Working.
6- Re-Press The Ignition Button If There Is Air In The Gas Tube, Which May Cause Ignition Failure Due To The First Use When Used For A Long Time.
7- At The Base Of The Pot There Is An Air Trigger, Adjust It To The Right Or Left To Allow Enough Air To Enter And Keep The Fire In A Better Position
8- When The Rice Is Cooked, The Main Burner Will Turn Off Automatically And The Pot Will Be In A Temperature Preservation Mode. Finally, Return The Button To The Upper Position And Close The Gas Switch.
9- While Cooking Other Foodstuffs, The Main Burner Will Not Automatically Shut Off When The Food Is Cooked. Close The Gas Switch, The Cooking Button, And The Temperature Keeping Button Each In Turn.
10- Adjusting The Gas Switch If It Is Necessary To Set The Fire When Cooking Food
Warning
1- Never Use Gas That Is Not Mentioned On The Label Of The Specified Brand. There Is The Type Of Gas And The Gas Pressure That Should Be Used.
2- Use A New Gas Hose. Never Use A Scratched Hose Or An Unused Gas Hose
3- Do Not Allow The Hose To Pass Under The Pressure Cooker Or Touch The Pressure Wall
4- Keep The Pot In A Smooth And Stable Place Before Using The Pot
5- Never Move The Pot After Placing It On The Fire
6- The Pot Is Not Suitable For Any Other Use Except For Cooking
7- Do Not Go Out Or Go To Sleep While Cooking And Turn Off The Main Source Of Gas After Using The Pot
8- Put The Towel Or Platecloth On The Pot Or Anything Else That May Cause An Incomplete Burn Because The Fire Will Go Out.
9- While The Pot Is Working Or After Work, The Base And The Temperature Of The Main Burner Will Be Very Hot, And For This Reason, Other Parts Should Not Be Touched Directly Except For The Switch.
10- Usually, Be Careful If The Fire Burns Well. If It Is Not, Turn Off The Gas Switch And Use It After Repair.
11- If There Is A Gas Leak, Close The Gas Switch Quickly, Open The Windows To Allow Air To Enter, And Never Open And Close Any Electrical Equipment Or Light A Fire, Because It May Cause An Explosion. Before Using It Again, Check The Problem And Fix It.
Maintenance
1- The Inner Pot, The Cover, = The Water-Carrying Plate, The Wind Source And The Steam Plate Can Be Washed And Dried With A Dry Cloth, While The Other Parts Are Never Washed Or Removed From The Appliance
2- Keep The Sensor Clean And In A Smooth And Stable Position. Clean It With A Soft Cloth And Do Not Scratch Or Distort It.
3- Never Wash Plastic Parts, Coatinged And Decorated With Soda Or Petroleum
4- The Path Of The Gas Through The Pipe Is The Nozzle Of The Gas Sprinkler, And The Fire Holes Of The Main Burner Must Be Kept Unclogged And Not Jammed If The Fire Holes Are Not Very Dirty, And Clean Them With A Soft Brush
5- To Maintain The Quality Of The Fire, Clean The Ignition Shaft With A Soft, Dry Cloth.