DPT, Portable High-Pressure Car Wash Kit, Car Exterior Cleaning Kit, Black, load 25 Par
-1001x1001.jpg)
-1001x1001.jpg)
-1001x1001.jpg)
-1001x1001.jpg)
-1001x1001.jpg)
-1001x1001.jpg)
Best Seller
Free Shipping
-80x80.jpg)
-80x80.jpg)
-80x80.jpg)
-80x80.jpg)
-80x80.jpg)
-80x80.jpg)
Make your car cleaning process easy and effective with the car washing device, the ideal solution for a clean and shiny car in record time. It is designed to provide powerful cleaning power and a convenient operation, making it the perfect choice for taking care of your car and enhancing its exterior appearance with ease. Thanks to its advanced technologies and multiple features, it provides you with exceptional cleaning results.
Name: CAR WASHING MACHINE
Item No: DP4X4-0067B
Material: fine copper + alloy + ABS +PE
Size: 33.5X33.5X11CM
Weight: 2KG
Traffic load: 4L/min
Length of water pipe: 5M
Product contain: 1, water pipe; 2, foam watering can; 3, cleaning gun body; 4, water filter; 5, universal joint; 6, multi-function nozzle; 7, charging plug; 8, extension telescopic rod; 9, faucet valve; 10, lithium battery.
Product Voltage Power Battery Capacity Endurance Peak Pressure
12V 200W 4000mAh About 25min 25 bar
How to use
1, Pull down the outer ring of the quick connector.
2, After pressing firmly to the bottom of the water inlet connector, pull down, Push the outer ring of the coming quick connector up to return to its original position.
3, The extension rod or copper head can be installed directly according to the thread direction.
4, Install the gun head on the outer ring of the lower copper head joint, Then return the outer ring to its original position to complete the installation of the gun head.
5, Add car wash liquid to the soap pot and rotate it to install after normal mixing.
6, The installation position of the soap pot is the same as that of the gun head, and the method is the same.
7, Install lithium battery.
8, The water gun installation is complete.
Troubleshooting
problem cause solution
The machine can be
started, the water
can not suck up or
the pressure is
insufficient The machine is too high from
the water source Reduce the height of the machine from the water surface below 2m
Water pipe filter blocked Take out the water pipe filter and wash the debris with water
Poor connection between
self-provided water pipe and machine Check and reconnect the water pipe
The machine inlet pipe connection is loose Tighten the nipple connector of the water inlet pipe by hand or a wrench
The pump, water pipe, and
accessories are frozen Use after thawing
The water pipe is bent Straighten the water pipe
Water flows out after the machine is shut down Water remains in the pump after
shutting down The machine is idling, drain the water before storing
The foam pot cannot spray detergent The foam pot is blocked Wash with water
The machine won't start The battery pack is dead Charge the battery pack
The battery pack is broken Replace the battery pack
Machine pressure is not continuous
The water pipe enters the air Check if the nipple connector of the water inlet pipe is loose or if there is water in the bucket
The machine stops automatically The battery pack is dead Charge the battery pack or replace the battery pack
Portable car washer safety warning
1. Do not direct the flow of water to equipment containing electrical components.
2. Use only accessories supplied or approved by the manufacturer to ensure the safety of the appliance.
3. Disconnect the battery pack after use and before user maintenance or cleaning.
4. Keep the appliance out of reach of children when energized.
5. Stop using the appliance if it accidentally falls to the ground and there is visible damage or leakage.
6. When connecting the battery pack, the appliance should not be left unattended.