DPT, Hydraulic Jack, Hydraulic Trolley Jack, Yellow

Item No.: DP4X4-0013
Item Name: Electric Jack for Car
Rated Power: 120W
Operating Voltage: DC 12V
Max. Current: 10A
Fuse: 15A
Max loading Weight: 2 Ton
Lift Range: 12-35CM
Power Cable: 3.5m
Net Weight: appro.4.2Kgs

Feature
1. Economical, practical electric scissor jack
2. With BMC Packing, easy to carry
3. Matching with battery clamp connecting cable
4. 3.5M power cable with the adapter of auto cigarette lighter
5. The machine just connects the car cigarette lighter, and then the car will be risen and fallen.


Operation Manual
PLEASE STUDY THE MANUAL CAREFULLY BEFORE USE/OPERATION:

Item No.: DP4X4-0013
Item Name: Electric Jack for Car

1. Packing List：
1 PC Electrical car jack
1 Set Connecting clamp with battery
1PC Hand Crank
3PCS Fuses

2. Technical Data

Model
Input Voltage
Rated Current
Loading Capacity
Rated Power
Lifting Range
N.W/G.W
Type of fuses
Usage Temperature

DP4X4-0013
DC 12V
10A
2000Kg
120W
12-35CM
4.2/5.3KG
15A
-20℃ to +70℃


/
1. Graph for the weight
2. Loading Weight (Kg)
3. Jacking Height (CM)
4. Jacking Time (Second)


3. Operation Scope
The electric jack is used for cars.

4. Operation Environment
The electric jack is applicable below 5000m above see level and from -20℃ to +70℃ under natural temperature. It is prohibited to be operated in the circumstances of diggings and magnetic and explosive fields.

5. Operation Duration
It is 2 years.

6. Operation Instructions
Warning: Please follow the OPERATION MANUAL strictly.
1. Park the braked car on smooth and solid ground. Do not park the car on slope on over 6°.
2. Please put a block or a product before the tire to avoid the car movement. (FIG.1)
3. Start the engine and insert the plug of the electric car jack into the car lighter jack. (FIG.2)
4. The electric jack should be set on smooth and solid ground. The saddle of the electric jack should be placed against the right bottom of the car.
5. Press “∧” on the switchboard and confirm that the saddle is connected with the right bottom position of the car press “∧”continuously till the car is jacked to an ideal height.(FIG.3)
6. Press “∨”on the switchboard to lower the car completely after repairing.
7. Press “∨”on the switchboard to adjust the position of the electric jack when the saddle is not touched on the right bottom position of the car.
8. Counter-Clockwise turning will lower the jack easily. When no power supply.

/
/
/

WARNING
Do not move the car while the electric jack is working.
ATTENTION
If the electric jack cannot work after the car be lifted, you can insert the hand crank into the cover of gear box to lower the electric jack.(FIG.4)

/

7. Safety Indications
The following points are important for your safety:
1. Please read the “OPERATION MANUAL” carefully and understand all the instruction before operation.
2. Overloading operation is forbidden
3. The electric jack should be place only on smooth and solid ground.
4. Keep your body away from the car while the electric jack is working
5. Overloading operation is forbidden without other safety devices.
6. The electric jack is unsuitable for long and continuous operation due to its machine.
7. It is prohibited to lift the person.

8. Maintenance
The electric jack must be maintained and repaired by professionals according to the operation manual
1. Put lubricant on the screw bolt of electric jack periodically.
2. Keep it clean and dry after operation.
3. Any change in the structure, which might affect its safety is forbidden.

9. Storage
It is stored under the temperature from 0-70℃ with humidity less than 70%。
To avoid severe collision, upside down and water during transportation.

10. Trouble Analysis

Trouble
Causes
Measures

The electric jack does not work or the car cannot be jack up
A. Overloaded
A. Reduce the weight


B. No electricity in the lighter
B. Check it or insert the plug correctly


C. Fuse is broken
C. Change a good fuse


WARNING
Please check if the name plate and warning indication sticker are in good condition.
Please pay special attention to the following position which may nip your finger.

11. Assembly Sketch and Component List
1. Switch board/Controller
2. Screw
3. Gear Box
4. Stand Holder
5. Screw bolt
6. Platform
7. Cigarette plug

/



/
Item No.: DP4X4-0013
Item Name: Electric Jack for Car
Rated Load Weight 2 Ton
Must be fixed the car tire prevents slipping



/

INSTRUCTIONS
1. Insert the plug into Car lighter Jack
2. Press “∧” or “∨” button to control the Jacking height
3. Working Voltage: 12V with maximum Current: 10A
4. Jacking Range: 12CM-35CM




/

CAUTION
1. Please read carefully and understand the manual before using the product.
2. Overload is forbidden
3. Must avoid the product that be Jacked to move
4. Must to park the braked car on smooth and solid ground
5. Working under the product that is being jacked is forbidden
6. It is car Jack using it as the support tool is forbidden
7. To avoid hip your fingers it is forbidden to put your hand into the machine
8. To avoid injury or losing property you must abide the warning