DPT, Air Cotton Tent for Trips, Inflatable Tent, Kaki Dark, Size 230*390*200 Cm
-1001x1001.jpg)
-1001x1001.jpg)
-1001x1001.jpg)
-1001x1001.jpg)
-1001x1001.jpg)
-1001x1001.jpg)
Best Seller
Free Shipping
-80x80.jpg)
-80x80.jpg)
-80x80.jpg)
-80x80.jpg)
-80x80.jpg)
-80x80.jpg)
Experience the details of nature around you and enjoy the stunning landscapes with a unique and distinctive air tent that allows you the opportunity to explore and contemplate everything around you while camping, equipped with a bag and a pump for easy use, in a small size perfect for trips and camping.
Model Number DPTE-0008
Usage Instructions:-
Important: Please read the instructions before use and keep them for future Reference
Instructions for deflating and folding the tent
Step 1:
- Slowly twist the support rope and ties to store them; undo the white valve from one air support
- Be careful that there will be a loud noise when opening the valve
- Wait a few seconds to allow the air to exit through the props
Step 2:
- Zipper the door partially closed, then leave the white valve open so that air can escape
- By hand, carefully push any remaining air out of the air struts (the air strut valve and cover are open to deflate)
Step 3:
- Carefully fold the ends of the tent to the half
- From one end, fold the tent over the strips that are equal to the width of the carrying case
- Roll it toward the end of the tent valve, making sure the tent is completely dry so that it can be stored
- Put the tent, stakes and air pump inside the storage bag
Tent Installation instructions
Step 1:
- Find the location: Make sure the space for the tent is equal and safe
- Put the tent and tighten the four corners with the pegs
- Ensure that the white valve is securely attached to the air strut
Step 2:
- Connect the pump hose to the air strut valve and, using the pump, inflate it until the air struts inflate steadily, the tent standing may require a little lift on the strut
air
Step 3:
Remove the inflation pump and put the valve cover back in place, fully support and secure the tent,
Now enjoy your tent
Usage Instructions:-
Important: Please read the instructions before use and keep them for future Reference
Instructions for deflating and folding the tent
Step 1:
- Slowly twist the support rope and ties to store them; undo the white valve from one air support
- Be careful that there will be a loud noise when opening the valve
- Wait a few seconds to allow the air to exit through the props
Step 2:
- Zipper the door partially closed, then leave the white valve open so that air can escape
- By hand, carefully push any remaining air out of the air struts (the air strut valve and cover are open to deflate)
Step 3:
- Carefully fold the ends of the tent to the half
- From one end, fold the tent over the strips that are equal to the width of the carrying case
- Roll it toward the end of the tent valve, making sure the tent is completely dry so that it can be stored
- Put the tent, stakes and air pump inside the storage bag
Tent Installation instructions
Step 1:
- Find the location: Make sure the space for the tent is equal and safe
- Put the tent and tighten the four corners with the pegs
- Ensure that the white valve is securely attached to the air strut
Step 2:
- Connect the pump hose to the air strut valve and, using the pump, inflate it until the air struts inflate steadily, the tent standing may require a little lift on the strut
air
Step 3:
Remove the inflation pump and put the valve cover back in place, fully support and secure the tent,
Now enjoy your tent