DPT, Air Cotton Tent for Trips, Inflatable Tent, Beige, Size 210*210*136 Cm

Item No.: DPTE-0023
Product Name: Auto Inflatable Tent
Product Dimensions: L210×W210×H136 cm
Product Material:
• Fabric: Polyester PU2000mm
• Frame: TPU
• Floor: Polyester, PU2000mm
• Material of air pump: ABS+ Silicone
• Air Pump Power: 18W
• Battery Capacity: 12V 2000mAh
• Usage Times of One Full Charge: 20 Times
• Charging Time: 4.5 Hours
• Input: 5V — 2A
Pack Size: 50×20×20cm
Product Weight: 4.30kg
Product Origin: China
Purpose: Camping, Outdoor Living
Sleeps: 3P
Logo: DPT
Barcode: 6932230607626

Description:
The tent is electrically automatic inflatable. Simply press a button, and it will be inflated and set up completely in just minutes. Super convenient and easy to use! Free your hands and make assembly a breeze. Simplifying the complexity.

Features：
 Built-in High-pressure Air Pump
 3 minutes to auto-setup with an air pump
 Strong & Durable Inflatable Air Beams Frame
 Auto Stop When it Filled
 Lightweight & Portable

Master Cartoon: 52×21×21cm
Case pack: 1 PCS
N.W./G.W.: 4.30/4.80kg
Shipping Mark: DPT
CAUTIONS
 Keep fire and flammable away from the tent
 Do not use combustible heaters or lanterns, etc. Inside at any time
 Do not spray tent with insecticide or repellent not specifically recommended for synthetic tent fabrics
 If leaking occurs at the sewn seams, use an approved seam sealer
 Always take down your tent when not in use
 Prolonged exposure to sunlight will degrade the synthetic fabric
 Pack away your tent after it is thoroughly dry to avoid mildew
BUILD STEPS
1. Take out the Automatic Inflatable Tent from the bag and unfold it

2. Spread out the tent, and tighten three valves at the bottom of the air beams. Open the zipper at the bottom of the air beam where the air pump is located.

3. Press the power button and wait three minutes until the inflation is completed. There will be a beep sound and the air pump will shut off automatically.


PACK STEPS
1. Open the three valves at the bottom of the air beams.


2. Gather the three air beams where the valve is located.

3. Fold the cloth around towards the air beams and roll up the tent from where the air pump is towards the other three air beams.

4. Roll up the tent in the direction shown.

5. Place the Automatic Inflatable Tent in the storage bag.