ALSANIDI, Stainless Steel Coffee Grinder, Small Coffee Grinder for Trips, Multicolored 

Item no.:SND-CG
COFFEE GRINDER
BRUSH INCLUDED
WITH CARRIER BAG
Grinding coffee beans and other dry spices


Instructions

Product name: 304 Stainless Steel DC 12 V Coffee Grinder

Please read this instructions before using.

Technical parameters:
Type: Blade Coffee Grinder Material: Stainless Steel
Rated Voltage: DC 12V Rotate speed: 18000 R/min
Rated power: ≤120W Rated operating time: ≤30 sec.
Capacity: 80g Rated the intermittent time: 1min.
Certification: CE,SASO









Product component: RED BLACK BATTERY

Application notice:
※ Please read the instructions carefully before using, wrong operation may cause danger. Be careful in the operating tools, specially in installation, remove and cleaning.
※ Keep it far away from children.
※ Do not put the whole machine into the water to clean.
※ If there is anything wrong or need to be repaired, please take it to the service center, be repaired by professional.
※ Do not use it for a long time, or it will damage the machine internal parts.



Product features and use:
This product is a new design for outdoor coffee grinder, small but beautiful, strong power, low noise, easy to use.

Method of use:
※ take the coffee beans(less then 80g) into the cup, please don't put beens exceed the cup level.

※ Fixed well the PC transparent plastic lid and make sure that the lid closes securely.
※ Connect the power: put the cigarette plug into the car cigarette lighter, if use the boost cable, please fix right to the positive and negative connection to Avoid counter clockwise.

※ ① put the materials into to the cup first.
※ ② Be sure the PC transparent plastic lid closes securely.
※ ③ please connect the power first, then turn on the switch. the working time should not exceed 30 seconds continuously, the intermittent time can’t less than 1 minute.
※ Turn off the power, take out the Ground coffee after the grinder stop working. Make coffee and enjoy it!





※ After using it, please clean it by dry brush or cloth, put it in dry and ventilated place.

Fault judgment and eliminating methods
Problem Reason Solve method
The motor can not work Power plug or clip can not connect well Please check the plug and clip whether it connected well or not.
Motor overheating Grind to much materials s or using for long time Reduce the materials
working again after grinder cooling