CMP, Car battery subscription, Car subscription, Black*Red, Size 3 Metre

Item No.: CM4X4-0004
BOOSTER CABLE
Material: Copper+ Aluminium
Rating: 12V-24V, Max.500A
Wire Length: 3 m
Copper Sectional Area: 10 mm²
Net Weight：1.7KG
Specification：500A(0.3mmX170pcsX12mmX3M)


Operating procedures:
1. Connect one red clamp (+) of the cable to the positive terminal of the dead battery.
2. Connect the other red clamp (+) of the cable to the positive terminal of the good battery.
3. Connect one black clamp (-) of the cable to the negative terminal of the good battery.
4. Connect the other black clamp (-) of the cable to the negative terminal of the dead battery.
5. When starting, please complete the operation instantly, and there should be a cooling time of 10 seconds between two adjacent startups.
6. Unload the cable in the reverse order of installation.

Warning
 Operate strictly according to the steps described in the manual.
 Check the labeled voltage of both batteries to ensure they are the same.
 Turn off all loads in the car, put the car in neutral gear, pull up the handbrake, and start the engine. Smoking near the vehicle is prohibited.
 If the car battery is frozen, do not start the car.
 Please ensure that the polarity of the battery connections is correct.
 During operation, the car should not be in contact with other vehicles.
 Batteries produce explosive gases! Please wear protective goggles when installing cables.
 If the acidic substance in the battery leaks accidentally and splashes onto your skin or eyes, rinse immediately with plenty of water and seek medical help immediately.