ALSANIDI, Solar-Powered Flashlight, LED Searchlight, Woody, Size 32 Cm

Name: SOLAR LED LIGHT
Item No: SNL-0110
Material: ABS
Size: 32*10*10CM
Weight: 0.26KG

BEFORE INITIAL USE
Place the solar panel in direct sunlight to charge for 6-8 hours in order to sustain maximum performance. Please note that the light is designed to work in the dark. If there are strong light sources nearby the LEDs may be very dim or not work at all.

PRODUCT ASSEMBLY
1, Connect the two base pipes together by inserting the connector into the opening of one of the pipes. Push together until tight.
2, Connect the lantern to the assembled pipes by inserting the base of the lantern into opening on the top of pipes. Remove film from solar panel.
Note: You can remove one of the female pipes to shorten the overall height.

LIGHT SETTINGS
1, Turn your Tiki lantern “ON” and “OFF” by firmly pressing the black rubber button on the rim of your lantern.
Note: If left in the “ON” position your light will automatically illuminate at night.
To make sure your light is fully charged place your hand over the solar panel. Your light should illuminate if your product is charged. If it does not illuminate, please continue to charge.
2, To change your light settings gently push the black rubber “ON”/“OFF” button. There are three lighting modes.
1. WHITE: This setting will produce a steady bright white light.
2. GLOW: This setting will produce a steady orange/glow light.
3. FLAME: This setting will produce a flickering flame resembling a real torch.
Do not push the button all the way down. This will turn the light ON/OFF. You only need to push the button softly. If you hear a clicking noise you are pushing too hard.

Reminder: When staking your light into the ground, do not push from the top down. Grip the bottom poles &push firmly down into the ground until secure.