Maxsun, Portable Gas Stove for Travel and Camping, Outdoor Cooking Gas Stove, Brown, Size 32.9*27.7*11.4 Cm

Portable Maxan gas stove set for travel and trips
Model: MS-3900DFW
Size: 32.9*27.7*11.4cm
Gas type: butane
Nominal heat input: 4.5 kW
Gas consumption: 300g/h
Hole diameter: 0.mm
Shutdown pressure when the pressure safety device is activated:
Closure: 5.5 bar - 7.0 bar
Brown color
Advantages:-
- Portable gas stove, solid and fixed
♦ Compact size, stable, convenient to use and store
- Works on gas canisters
- Light, easy to use and carry during land trips and camping
Warning:-
- Used in outdoor places only and well-ventilated places.
- This stove should only be used with MAX MSF-1 CRV / MSF-1a butane gas cartridge.
- Read the instructions before use
- Do not use a frying pan larger than 260mm as it can cover the gas cartridge compartment and cause the gas cartridge to overheat.
Warning: It is strictly forbidden to use the baking sheet if the length of one of its sides is longer than 180 mm, otherwise there is a high risk of explosion in the cartridge due to overheating.
LED Guide
(1) Electrode
(2) Cartridge cover
(3) Pot Support
(4) Distillation pot
(5) Torch
(6) Cartridge arm
(7) Control Panel
(8) High/low control handle with piezo ignition
Read the instructions carefully before use to familiarize yourself with the stove before connecting it to its gas cartridge.
Safety Device:-
- The burner is equipped with a safety device that stops the flow of gas if there is pressure in the cartridge, for example due to overheating, it becomes too high
To continue using..
- Turn the control knob (8) to the " position ".
- Turn the cartridge lever (6) to the "Unlock" position and remove the cartridge.
- Turn the control knob to the ignition position to release any excess pressure inside the valve.
- Push the reset lever down with a red rubber cap.
- Push and turn the control knob (8) into the ignition position to release any excess pressure inside the valve.
- Put a new cartridge after checking that the cartridge lever (6) is in the "unlock" position.
(If the new cartridge is not manual, cool the used cartridge with water.)
- The cartridge can be installed only when the control handle (8) is off.
Use the stove for the first time:-
1. Make sure the control knob (8) is set to " " by turning it clockwise and setting the cartridge lever (6) to "Unlock".
2. Open the cartridge cover (2) and insert the cartridge, with the head at the front, with the notch pointing up and in line with the value index (Fig. 2).
3. Press the cartridge lever (6) down (Figure 3) and close the cartridge cover.
4. If you hear a "hissing" sound, it means that the cartridge is not installed correctly. Do not attempt to ignite the stove but move the lever (6) into the "UNLOCK" position and repeat step (1-4).
5. Push and turn the handle (8) completely to the ignition position until you hear a crackling. (Figure 4) Repeat this procedure until the burner ignites.
6. Set the control knob to the desired position. (Figure 5) Never set the cartridge lever (6) to "UNLOCK" position during use
After use
1. Turn the control handle (8) to the " position ".
2. Check if the igniter has gone out before setting the cartridge lever (6) to the "unlock" position.
3. When the stove cools down completely, for your personal safety, remove the cartridge.
4. Turn the control knob (8) into the ignition position to release any excess pressure inside the regulator.
5. Put on the red protective cap and always store the gas cartridge in a cool, dry and ventilated place.
The butane cartridge must be changed in a safe place, for example. Outdoors or in a well-ventilated place.
Cartridge change
- The cartridge can be removed even if it is not empty once your stoves have completely cooled:
- Make sure that the gas inlet is completely closed by turning the control knob (8) clockwise to the position "●" the torch (5) will turn off.
- Disconnect the cartridge by placing the cartridge lever (6) in the "unlock" position.
- Open the cartridge compartment cover (2) and remove the cartridge.
- Butane cartridge should be changed in a safe place, for example. Outdoors or in a well-ventilated place, preferably outside, away from any source of ignition such as open flame and electricity and away from other people.
Check the seals before connecting a new gas cartridge to the appliance. (Figure 6)
Put on a new cartridge following the instructions in the section "Using the burner for the first time".
Storage - Maintenance
When the stove has cooled completely, it should be cleaned of any food residue or fat after each use.
Store the stove and cartridge in a cool, dry and ventilated place, out of the reach of children.
Do not modify the device.
warning
Such a stove can only be used with a MAX MSF-1A / MSF-1 CRV butane cartridge.
Always place the stove on a stable and heat-resistant horizontal surface.
Do not move the stove during use.
The device should be away from flammable materials.
Minimum distance from the adjacent surface: rear 40 cm - side 40 cm - roof 120 cm.