DPT, Side Car Umbrella , Portable Car Umbrella , Kaki, Size 210*210*190 Cm

ITEM NO: DP4X4-0066
4WD Awning
Fabric: 420D Oxford with PU coating
Poles: Anodised aluminium alloy
Knuckles: Cast aluminium alloy
Cover: PVC
SIZE: 210cm
Fabric color : khaki
WEIGHT: 15.00KG

Fan-shaped car side tent installation manual

Product List
1. Please open the package and find the accessory bag in the back slot of the tarpaulin bag. After removing the accessories, please tighten the zipper of the bag and keep it in a safe place.
See Figure Pig.1.

Installation steps
Note: Before installation, please make sure that the original car comes with a luggage rack or luggage frame to facilitate fixing the side tent.

1. Open one end of the protective cover of the rear chute and install the M8*25MM screw.
Slide into the chute behind the awning and close the protective cover. See Figure Pig.2.


Pig.2

2. Take out the L-shaped installation code and fixing screws of the awning, and fix the installation code in the appropriate position of the luggage rack, or according to the condition of the car body.
Choose the appropriate installation method as shown in Pig.3.

Pig.3

3. Fix the awning on the installed L-shaped mounting code and make sure that each screw is in a locked state.






Operating steps
1. Open the awning cover, take out the telescopic pole support rod and the vertical pole, and lift the awning tarpaulin slowly toward the rear side of the car.
The expanded view is shown in pig.4.


Pig.4

2. When the awning reaches its maximum extension, adjust the pole to the height of the vehicle
Rotate and lock the thin rod at the lower part of the vertical rod horizontally.

3. After the vertical pole is fixed, open the awning vertical pole to the longest position and insert it into the front pole.
In order to ensure that the awning is fan-shaped and flat.

4. Fix the crossbar and the awning with screws on one side of the front of the car, such as Pig.5, attach the two sides of the awning
The Velcro is fixed on the vertical rod to complete the installation, such as Pig.6.

Pig.5


Pig.6

Attentions
When conditions permit, be sure to fix the windproof rope (the direction of the rope is toward the direction of the car body)
In rainy weather, please lower any of the front poles so that one side can be tilted to facilitate rainwater to flow out.