DPT, Electric Bidet Sprayer, Portable Bidet Sprayer, White*Orang, capacity 8 L

Name: SPRAYER
Item No: DPG-0010
Material: HDPE, ABS, PP
Size: 19.8X19.8X47.3CM
Weight: 1.3KG

Item No Capacity Voltage Current flow Battery capacity Work time Charging time Flow
DPG-0010 8L 5V 1.2A 2.5Ah 120min 240min 0.3L/min

Assembling instruction:
1. Please open the cap as pic A in above.
2. Put water insider. Please refer to pic B in above.
3. Close the cap as pic C in above.
4. On/off button as pic D in above.
5. Take out lance and handle as pic E in above.
5. Adjust nozzle cap for jet and mist spraying as pic F in above.

q

Maintenance of equipment:
1. Please recharge after use if no power inside.
2. Clean the machine by water.
3. Put the machine in a cool and dry place.


How to use charger:
1. Pull out the charge USB micro hole.
2. Put the charge line head in correct direction.
3. Insert the line head to hole.
4. It is under charging when the right light comes on, after around 240minuts all three light show, means charging finish


Troubles shooting:
Problems Causes How to solve
The motor fails to start after being powered on 1. The power cables come off.
2. The battery is out of power.
3. The power switch has been damaged. 1. Dismantle the cover to connect the cable.
2. Charging
3. Replace the switch
Water can not go out Filter maybe clogged Open the bottle and take out the filter to clean it

Safety instructions:
1, Suitable measures must be taken to keep the unit out of the reach of children.
2, If spraying in light wind conditions, always spray with the wind blowing the spray away from
you.
3, Do not spray contents of sprayer on persons or animals.
4, Ensure all parts are intact and the temperature of the liquid under 40℃ before each use.
5, Chemical sprays are dangerous if swallowed or come in contact with the skin, always refer to the chemical supplier safety instructions or contact the poisons information center or doctor immediately
6, Do not leave sprayer (filled, empty) unattended in direct sunlight.
7, Do not used to spray solvents, chemical, or flammable liquids.
8, Must put clean water in tank to spray several minutes after usage to avoid any residue on pump and other important part.




1. ON/OFF
2.Light Indicator
3. Lance
4.Hose
5. Tank
6. Open the cap
7.Put clean water inside
8.Nozzle cap
9.Jet
10.spray mist
q


Charging light indicator 0-30%
Charging light indicator 30-70%
Charging light indicator 70-100%