DPT, Camping lantern, Portable lamp for trips, White*Gray, 3.7 V

Camping Lamp
Model: DPL-0029


Please read all operating instructions carefully before use.
/
12 bright LEDs
3 light modes: High, Low and SOS
Dual function flashlight and lantern
Doubles as a power bank with USB output for charging your devices
Rechargeable lithium battery
4 stage battery status indicator
Dual hooks for hands-free lighting
Strong magnetic base
Compact and lightweight

SPECIFICATIONS
Lumens
220 (high), 110 (low)

Run Time
6 hours (high), 14 hours (low)

Battery
3000mAh lithium polymer (3.7V)

Impact Resistance
1 meter

Beam Distance
15 meters

USB Output
1 A

CAUTION
This product is not a toy: Do not allow children to play with or near this item.
Do not store in direct sunlight or near a heat source.
Use for intended purposes only.
Do not submerge in water.
CHARGING THE INTERNAL BATTERY
This product may arrive partially charged. To get the maximum use, it is recommended to fully charge the unit before use. In order to prolong the life of the battery, be sure to fully recharge the unit every 3 to 6 months, even if the unit has not been used.
Check the status of the battery by pressing the power button once. The number of illuminated LEDs indicates the percentage of charge (25%-100%).
Unwind the USB cable and plug into any USB charger/power source.
While recharging, the status indicator lights will show the present battery capacity. When the internal battery is fully charged, all indicator lights will be solid. Charging time for a fully depleted battery is 5 to 6 hours.

/
CARE AND MAINTENANCE
• Periodically wipe the entire lantern with a soft clean cloth.
USAGE
Light
The lantern has 3 light modes.
To turn unit on: press the power button 2 times for High mode (pressing once will only show the battery status)
To change modes: press the power button to cycle through the modes once for each mode (High > Low > SOS > OFF).
Power Bank
The camping Lantern doubles as a portable power bank which allows you to charge your devices when you need them.
Open the dust cover from the USB port
Connect a user-supplied USB cable to the USB power port
The battery indicator LEDs will illuminate.
After use, disconnect the USB cable and replace the dust cover.