ALSANIDI, Scorpion flashlight with Violet light, Handheld Flashlight, Black, 1200 Lumens

Item NO.: DPL-0021
Item Name: flashlight
Size: D4*L14.75cm
Color: black
NW: 170g
Material: HA-III military hard-anodized finish aluminum alloy
Specification
LED: Cree XP-L
Input: DC 2.75V-6V
Output: Max 1200 lumen
Reflector: Precise metal filmed
Glass: Filmed mineral glass
Housing: Premium Type III hard-anodized anti-abrasive finish of black
Switch: Tail cap and side switch
Size: Head: Ø40mm; Length: 147.5mm
Weight: 170.2g (exclude battery)

Description
DPL-0021 is a White+4PCS UV separate LED chips combined, compact tactical flashlight with stunning 1200 lumens maximum white output and high bright extreme strong UV light. It's ideal for scorpion searching, map reading, outdoor activities and so on.

Features
1. White + UV LED high power chips combined.
2. High-strength aerospace aluminum body, Mil-Spec hard anodized for extreme durability.
3. Coated tempered resists impact glass in high light transmittance.
4. Metal reflector to create a high intensity beam.
5. Waterproof O-ring and gasket sealing.
6. Maximum output of 1200 ANSI lumens.
7. Turbo, High, Medium, Low brightness and strobe, SOS tactical function.
8. Location Beacon Indication blink(2.5 seconds/every)
9. Rechargeable Micro USB port.
10. Removable pocket clip; USB cable, nylon holster and Lanyard included.
11. IPX-8 water resistance, 2 meter impact resistance tested.

ANSI Chart
FL 1 STANDARD Turbo High Medium LOW
OUTPUT 1200 Lumens 300 Lumens 30 Lumens 8 Lumens
RUNTIME 1.5 Hours 6 Hours 20 Hours 350 Hours
INTENSITY 13,300cd
DISTANCE 180m(Max)
WATERPROOF IPX-8
IMPACT RESISTENCE 2m


Caution
 Turn on in “strobe” mode may cause seizure in persons with photosensitive epilepsy.
 When operated for a long time, it will get uncomfortably warm. This is NORMAL and is not a defect.
 Do not use 16340 battery for this model.

Manual
Battery Load: Insert the 1*18650, 2*CR123A.
On/Off: Hold and click the tail cap power on, again power off (torch has mode memory function).
Mode change: when power on, press the side switch In short, Turbo-High-Medium-Low-Medium-High-Turbo modes will be changed in cycle; press constantly then release, UV mode will be changed in cycle as well, short press the side switch back to white normal illumination mode.
Power detection: The flashlight has Battery Indictor function. Press the side switch constantly then click the tail switch, the lamp under the side switch button will blink and flicker in Green. One Green blink indicates 1V; one quick flickering indicates 0.1V. For Instance, 3.8V is 3 Green blinks and 8 quick green flickering.
Power recharging: Lift the black rubber cover and connect the USB cable included to the Micro USB port then insert another end to the USB outlet as below guide. When torch is recharging in USB cable, it only works in low mode to prevent the torch from damage.

Power Tips
1. The above running time data is tested in regular ambient temperature using 1*18650 3500mAh rechargeable battery. Different batteries may get different tolerance data when compares with it.
2. Location beacon function is built in for preventing losing and helping people find the torch quickly in the dark. When power off, quick press the side switch 4 times, green breathing light will be active on the side switch; press again back to normal illumination.
3． This torch has power auto detection function and mode memory, if battery capacity less 10% of total, will jump on the lower brightness switch intelligently to avoid the battery over discharge.

Accessories
Standard: Lanyard, holster, USB cable, spare waterproof ring and snap cap, O-sharp ring

Battery
Rechargeable Li-on battery 1*18650 3.7V
Lithium 2*CR123A 3.0V

Store and Maintenance
1. Disassembling the sealed head will damage the lights.
2. High quality batteries are recommended.
3. O-ring will be wore after a long-term use, change it with included spare one to maintain watertight seal.
4. Unload the batteries if assure the torch won’t be used a bit of long time, then better put it into inner box.
5. Store and keep the torch off fire, statics, steaming and humidity surroundings.
6. Clean the body with soft fabric clothing then lubricate in silicon grease per half a year.
7. Periodic cleaning of batteries contacts can improve the flashlight performance as dirty contacts cause the lamp flicking, shine intermittently or even fail to illuminate for below factors.
A: Battery need replacing (choose the battery which mentions on this manual)
B: PCB, spring or other contacts is dirty (clean the contacts in cotton swab in soaked rubbing alcohol)