DPT, LED Flashlight for Camping, Handheld Flashlight, Black, 1000 Lumens

Item No.: DPL-0024B
Item Name: LED Flashlight
Logo: DPT
Material: Aluminum
Color: Black
Weight: 39g without battery

Description
- The DPL-0024B is with the single side switch for easy one-handle operation from Moon-Low-Mid-High modes selection. It is impact resistant to 1m. It has waterproof to IP54 – meaning it can be splashed with water from any direction.
- The DPL-0024B is made of aircraft-grade aluminum with premium type III hard anodized anti-abrasive finish.
- The DPL-0024B cannot only be regarded as a lighting tool, but also as an adornment.
Usage and Maintenance
- Please don’t disassemble the sealed head, doing so may cause damage to the flashlight.
- High-power flashlights need batteries capable of high current electric discharge. Using rechargeable batteries are strongly recommended for flashlights’ high performance.
- Please take battery out of the flashlight if the light will not be used for a long time, or the power of the battery would be ran out. Otherwise, some poor batteries may leak and damage the flashlight.
- Clean the contacts of the light periodically, especially when the flashlight flickers abnormally cannot light up. There may be several reasons for a flickering or not working light.
Reason 1: The batteries need to be replaced.
Solution: Replace batteries (confirm the correct installation of anode and cathode)
Reason 2: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with an alcohol soaked cotton swab.
Warning
- DPL-0024B is a high intensity lighting device and capable causing eye damage, avoid shining the light directly into the eyes.
- Please do not mix batteries of different brands, size capacity of type for doing so may cause damage to the flashlight or the batteries used.
- Applications must be treated with caution and handled with care.
- Quality batteries with circuit protection will reduce the potential risk for combustion or explosion, but cell damage or short circuiting are potential risks that user should assume.
Features
- LED: Cree 1*XPL-HD LED with a lifespan of 50,000 hours
LED: Nichia 1*NVSU276A 365m
LED: Cree 1*XPE2-R2 630mm
- Max 1000 lumens output using 2*10440 battery
- 2*AAA Ni-MH:
Turbo: 250 lm (1.1h)
High: 105 lm (2h)
Mid: 60 lm (4h)
Low: 30 lm (7.5h)
Moon: 5 lm (37h)
RED: 1.6h
UV: 1.3h
Strobe: 250 lms
- 2*10440 Li-ion:
Turbo: 1000-200 lm (1min+46min)
High: 600-200 lm (4min+30min)
Mid: 330 lm (1.1h)
Low: 140 lm (2.4h)
Moon: 5 lm (46h)
RED: 1.5h
UV: 1.2h
Strobe: 1000 lms
- Working voltage: 0.9V-4.2V
- Max runtime: 37 hours
- Max beam distance: 107 meters
- Max beam intensity: 2880cd
- Impact resistant: 1 meter
- Waterproof to IP54 standard
- Size: 66.1mm(L)*29mm(W)*16.3mm(Thickness)
- Weight: 39g without battery
- Aircraft grade aluminum body structure.
- Premium type III hard anodized anti-abrasive finish.
- Ultra-clear tempered glass lens with anti-reflective coating.
- Highly polished smooth reflector creates max throw.
- Intelligent highly efficient circuit board design for max performance and long run time.
- Intelligent temperature controlled light output for user safety.



Operation
1. Click
2. Long press (1s)
3. Long press (2s)
4. Double Click
5. Special mode not memorized
6. White light group
7. Moon
8. High
9. Long press to change mode
10. Mid
11. Low
12. Long press for low mode
13. Click on-Click off
14. Long press(1s) for Moon mode (activates White light group)
15. Double click for Turbo
16. Off
17. Click off
18. Turbo group
19. Turbo
20. Turbo mode
21. Double click for Turbo
22. Double click for memorized
23. Long press to change mode
24. RED
25. UV
26. Click on-Click off
27. Long press(2s) for color light mode (activates Color group)
28. Single click for ON/OFF
( with memorlzed mode in active group)
Long press to change mode
( Inside the actlve group)
Double click for Turbo
Trlple click for Strobe
29. Very long press (5s)
Form off for Lock-out
Very long press (5s)
agaln for Unlock